10x T Shape 4 Pins Connector JACKYLED 10mm Non-waterproof Quick Splitter 12V 72W Clips for 5050/3528 SMD RGB LED Flexible Strip Lights 4 Conductor (32 Pcs clips is included)
JACKYLED T shape 4 Pins Connector 10mm, comes in a Pack of 10 and can be used for both Waterproof & Non – Waterproof LED conductor. These solder-less connector are idea way to link two pieces of LED strip light together. The plastic connectors simply open up and allow 3528/5050 RGB LED strip to be inserted, once closed they provide a strong connection which will provide power to the LED strips. It fit for all the 3528/5050 SMD RGB Color Changing led strip with 10mm wide PCB board. It is NOT suitable for 8mm wide LED strip lights, so please check the width of your lights before buying.
Just insert the L shape PCB board into the clasp of white connection box-making sure to match the + (positive) on the PCB board to the + on the white connection box. Please ensure the four solder joints on PCB board are clean. Then Open the white clasp of the connector and Insert the LED light strip into the clasp and fix it under the prongs – making sure to match the + (positive) on the strip to the + on the clasp. Ensure Clasp is closed well to make a solid connection.
Installation tips:
If you have a waterproof LED strip, should peel off silicon on the surface around soldering line area and gently slide in the strip light into the connector body and you’ll feel the connector grab the ribbon.
If you have a non-waterproof LED strip, just slide in the ribbon and make sure positive and negative poles match.
Safety Notice
To avoid electric shock and burn, turn off the power before cutting and reattaching light strips.
Package Includes
10 pack 10mm T shape RGB light strip connectors
32Pcs clips
Benefit of Using JACKYLED T Shape Connector
Long lifespan. Environmentally-friendly.
Soft light. Eye protection.
No UV or IR radiation.
Click “Add to Cart” now and get yours before stocks run out!
Product Features
- MAX WATTAGE: This T shape 10mm 4pin clip is 72w max wattage, you can use high wattage 3528/5050 SMD RGB LED light strip.
- PACKAGE INCLUDES: 10Pcs connectors + 30Pcs clips + 2Pcs clips for gift.
- PBT FIREPROOF MATERIAL: Made from fireproof material, high temperature resistance. They can not be ignited easily.
- APPLICATION: Fit the entire 3528/5050 SMD Double Density RGB LED strip 10mm wide. The product is High Quality & High Cost Performance & High Security. Perfectly for LED tape DIY project is Compatible with both waterproof and non-waterproof light strips.
- EASY TO USE: T Shape 10mm 4 Pin Connector is easy to install. You need to simply slot strip light into connector and close (no need soldering). Ideal for rectangles, squares, corner sections, etc. JACKYLED Products are sold and shipped by Jackybrand. If you purchase a product from another seller, please request a refund as it is a counterfeit. JACKYLED is the only Authorized Dealer of Jackybrand products.
Loading...
Lengthy, in-depth, yet detailed product review – with photos and (IMO) some good adviceð Okay, I will give credit where credit is due by stating that these 90° LED connectors are well-built, very inexpensive, neatly packaged, and do the trick…that is, I’m guessing “90%ð” of the time. However, there was just one small “hang up”: these 90° L-shaped connectors are NOT universal; meaning, that (for instance) in order to effectively work, one needs to make sure that they have lined up their strips to match the wiring structure of the L-shaped 90 (Pic 1).But…
Great 90* couplings for LED Tape lights – SEE SAFETY ISSUE There is not much really to say about these — they work with all standard LED tape lights. There are some things you need to be aware of:If you are using the rubberized waterproof tape lights, you will need to CAREFULLY strip back some of the rubber coating in order for these to work.I used a sharp single edged blade and cut straight down and was able to peel it back.Also, do a dry-run on a table with connectors and such on a table before sticking them to the surface. All the wires…
Great for my purpose! The alarm system on our house is hard wired. We have bulky connectors that need to be plugged and unplugged when we open and close the windows. I plan to use these small connectors in place of them. The old ones have been beat up over time from opening the windows without disconnecting the connectors first.These have four wires instead of just the two you need to complete the closed window circuit so I will tie the middle ones together and the outside ones together. This way it won’t…