AspenTek 100cm/3.28ft 2835 3528 LED Strip Connector 2 Pin Cable Adapter, No Need welding, 5 Pack(Single Color 3528 Led Strip light Connector)
AspenTek 100cm long LED connector is mainly designed for your DIY lighting project
Compatible led strip lights :
3528 led strip light single color(white, warm white, red, green, blue, pink purple)
2835 led strip light single color(white, warm white, red, green, blue, pink purple)
Installation:
Ensure your section of LED light strip has two welding spots (+ and -) and the contacts are both clean
Open the white clasp of the connector
Slide LED strip light into the clasp. Make sure + and – on the strip aligned to the + and – on the clasp.
Close the clasp and gently pull on the LED light strip to make sure you’ve made a solid connection.
Tips:
-This connector is mainly used for conductive connection. If it is not easy to be fixed in some place, please do the soldering.
-To connector waterproof led strip light, it will add an additional job for you. Please clean up the the rubber to make sure the soldering points of the light is clean, then insert it into the connection box
– If the PCB board is too thin, you may fix a little tape or a small piece of masking to make the PCB board enough thick, thus the light could be connected firmly.
Package content:
5 x LED Strip light connectors
Service Information:
In terms of product details or questions, please first contact our customer service center by email.
Warranty: All products enjoy 12 months warranty and 30 days Full Refund Guarantee.
Product Features
- Suitable for 3528 2835 LED led strip light
- Size: 1.6mm x 100cm (DxL) 2 pin 22AWG copper wire;Voltage:5-24V max current:2A
- No need welding or soldering, easy to use
- Cut the strip on the cut line, splice the ribbon electrically with this jumper and bend the wires whatever angle you require
- Intended use:100cm length cable enable far away led strip light linkable
Loading...
YMMV on the product but the customer service was excellent I needed two of these wires in the set of 5. The first one I used worked fine. The second one did not. I re-cut the LED strip and tried a third wire. That did not work either. I tented the strip from the back and reseated the connectors on the previously tried 2 wires again and they still did not work. Therefore, of the 3 wires I tried to use, only one set of connectors made the appropriate connection. I did not try the remaining two wires that came in the set of 5.I isolated…
Fit perfect, work great, huge time saver. Used on Home Depot, Commercial Electric LED kit. On impulse I recently bought an 8′ Multicolor LED strip kit from Home Depot. This kit was branded “Commercial Electric”. Of course, for $40 they couldn’t include more than two short connectors, making it impossible to do much useful with kit unless you have a 8 linear feet of something you want to light. In my case I needed to make a few turns. The Commercial Electric kit doesn’t provide the specification of the width of LED strip, however, I measured it and while it wasn’t perfectly…