Enerlites MPC-52V PIR Ceiling Sensor, Ceiling Occupancy Sensor, Ceiling Light Sensor, Occupancy Sensor, Commercial Grade 360 Degree FOV, 800 Sq. Ft Coverage, 120-277VAC, White
Commercial grade 360 degree passive infrared ceiling mount occupancy sensor with motion detection. Ceiling sensor switch automatically turns lights ON/OFF when motion is detected. Save money on energy bills by installing Enerlites MPC-52V as the installation time is reduced from 45 minutes, down to 10 minutes. No ceiling box is needed for this product. Includes two free lenses including one for closer range that is more sensitive to motion, and one for longer range with less sensitivity. To install this occupancy sensor ceiling light, simply drill a hole in the ceiling with your screwdriver, insert the back plate into the hole, then feed the wires through, and connect. The ceiling mount light is ideal for business or commercial use for the purpose of convenience, energy efficiency, security, and surveillance. Customization: • Adjustable Time Delay: 15 sec. – 30 min. • Sensitivity Adjustment: 50% / 100% Specifications: • Multi-level, 360° Fresnel lens for superior occupancy detection • Coverage: 360° field of view; 800 sq.ft of coverage • Operating Temperature: 32° to 131°F (0° to 55°C) • Incandescent 800W @ 120VAC, 60 HZ • Fluorescent 800VA 277VAC, 60 HZ • Motor: 1/4 HP, 120VAC,60 HZ • Wire Designation: Hot, Neutral, Load • Passive infrared technology, PIR motion sensor switch • Controls incandescent, CFL, and LED lighting. • UL Listed
Product Features
- Ceiling mount occupancy sensor uses Passive Infrared (PIR) technology to automatically turn lights on when motion is detected and automatically turns them off when no motion is detected for a set time delay
- Ceiling motion sensor can be directly attached to fixture or ceiling for easy installation. Simply puncture a hole in ceiling, then feed wiring through, cutting installation time by 30 minutes
- Full 360° Field of View Fresnel lens covering up to 800 sq. ft. Designed for ceiling height of about 8-10ft. Commercial grade, ideal for businesses and commercial properties
- Multi-level Fresnel lenses: ceiling sensor includes two interchangeable lenses for different sensitivity levels. Customize for best results
- Occupancy sensor ceiling mount is UL Listed, Incandescent: 400W @120VAC; Fluorescent: 800VA @120VAC, 1200VA @277VAC; Motor: 1/4 HP @120VAC. No ceiling box is needed
Watch out for the lenses in the box I installed it in a room with an 8ft ceiling and I had to walk almost directly below it for it to work.UPDATE after a couple hours of research….Frustrated at the prospect of returning a device I just bought and installed, I began reading about passive infrared technology on my phone in the dark room I was trying to automatically light up. In my research I found an article mentioning how a fresnel lens (the jewel shaped lens on the cover) helps with the sensitivity of the…
Scaleable can be wired in series with no ill affects, Infrared feature elements setting off from moving equipment or fans Excellent product works great at 8′-10′ comes with options for high up to 50′ lens and low 10′ or less. (didn’t use high bay lens) Easy to install in open 1/2″ electrical knockout. SB Ceiling mounted but would also work vertical just not as effective. They comes with all mounting hdw. Can easily set to various ambient light sensitivity and range as well as time on settings from 5 to 30 minutes at 5 minute intervals. Most important for me was being able to wire several to same lights to…