Growsun Adjustable Indoor Grow Light Mover Kit with 8ft Rail for Hydroponic Lighting System

Growsun 3.0 Adjustable Indoor Grow Light Mover Kit With 8ft Rail For Hydroponic Lighting System
Assembly Instrutions
Step 1 slide the three pins into the end of one of the rails and tap each one in about half way
Step 2 Line up the pins with the second rail and slide them together
Step 3 Tape the rails on solid ground to easily join them together
Step 4 Find the included”stop bracket”(see picture).Using the supplied screws,screw it onto one end of the rail.Wait to install the second “stop bracket”until the motor is installed.
Step 5 Using the supplied wood screws,mount the assembled rail onto your ceiling in its desired location.

LightRail moves your indoor grow lights over the tops of the plants, reducing shadow patterns and reducing heat, getting those grow lights closer for maximum use of available wattage, and getting the correct intensity of light on all the leaves for optimum Leaf Area Index (LAI) which is the single most important factor in increasing yield.

Product Features

• 10r/min Drive Motor Has a Adjustable Time Delay From 2 to 120 Seconds For Pausing the Lamp at The End of Each Run, You Can Turn the Knob Clockwise to Set Delaying Time as the Plants Need
• 8ft Length Rail,Made by Aluminium Alloy,Durable and Maximum Weight Support:10Kg(22pounds)
• Grow Lights with the Rail Mover Can Providing a Well-proportioned Illumination to The Plants
• 100% customer satisfaction. Replace or refund with any Non-manual problem. Please feel free to contact us in 24-hours