Product feature:

Hight: 17.2IN (43.9cm)
Diameter：4 IN (10cm)
Weight: 5.4 Pound（2.4KG）
Current: 10 Amp
USB ports: 5V / 2.1A for each port
Voltage: 125V ~ 230V
Power rating: 1000W
Power Cord length: 5 ft (150cm)

Installation Steps:

1.
Make a cut out in the desired location on your work surface.
Place near a power outlet and allow enough clearance for unit operation.
DO NOT place unit where the cable is strained or trapped.
2.
Remove the Threaded Lock Ring with the plastic washer.
Guide the power cord through the cut out.
Install the unit into the cut out and make sure it is fully leveled onto the surface.
3.
Guide the Threaded Lock ring through the power cord.
Screw threaded lock ring onto mounting collar by turning clockwise.
Locking ring should rotate smoothly if properly engaged. If not, the locking ring may be cross-threaded – undo and try again.
Ensure Plastic washer is tightly compressed against the underside of work surface.

NOTE:

Ensure the power to the unit is off prior cleaning. Clean with damp cloth and mild detergent then dry immediately.
DO NOT use any harsh chemical solvents.
DO NOT attempt to close the unit with power cords still connected to the outlet.
Never force the unit up or down – always check that there is no obstruction which would interfere with the operation of the unit before using or stowing the unit.

CAUTION:

To reduce the risk of electric shock use only indoors.
Risk of electric shock. Do not plug into another relocatable power tap

Product Features

• The most outstanding pop up outlet you can find on amazon
• Designed with LED lights/ Electricity protection/ Anti-Pinch/ Hidden disign
• Fit for 4” hole and make sure there is 20” depth for this unit
• 1 year warranty free replacement
• 30-Days money back guarantee. It’s not your type or if you don’t like it for any reason. We will refund you back