Nuvo Lighting TP168 Connector, Black

Quality inconsistencies Buyer be aware there may be a problem with this Live End cord. After installing it to my track it did not work. But when I turned it over, literally turning it upside down, the lights came on but only for a moment. I realized something was loose, making an intermittent connection. Luckily, this model comes with a removable cover, and I found that both incoming wires had not been properly attached to their respective screw posts. After re-installing the wires, the lights came on with no problem…

Installation instructions incomplete I think many have had the same problem I did–the track heads do not light if you do not install them properly, and the installation instructions fail to tell you that you need to hold the slip collar back before you place the head into the slot and keep it retracted until you have twisted the head 90 degrees to lock it in place. This is not very easy to do because the slip collar is hard to hold out of the track. If you do not retract the head, it will not make full contact with the copper…

Very nice track rail that was easy to use and install This Novo TR120 four-foot, Halo-style track worked excellently for a track lighting installation. You’ll need some kind of end power feed to attach to the end of the track. This will supply power to the strip. I purchased the , and it worked excellently. The TP169 snaps into the end of the TR120 and has wires in an enclosed area where Romex attaches.The Halo-style track has two…