TORCHSTAR High CRI90+ 6inch Dimmable Gimbal Recessed LED Downlight, 10W (75W Equiv.), Energy Star, 5000K Daylight, 950lm, Adjustable LED Retrofit Lighting Fixture, 5 Years Warranty, Pack of 4
Flexible lighting – 355° adjustable bulb head & 35°tilt angle, provides more flexibilities and control towards the lighting direction. Simply turn the
bulb head towards your desire direction and it will stay that way securely.
Perfect luminaries for using on sloped and slanted ceilings and walls for a more effective lighting.
Perfect color – CRI90+ excellent color consistency and rendering, show object’s true and natural color.
Focus spotlight – 36° beam angle, focus and uniform spotlighting. Suitable for retail displaying lighting of merchandise, jewelries, watches,
paintings and artworks etc.
Quality guarantee – UL listed for top quality and safe operation. Suitable to use in damp locations. 5 years product warranty for costumer’s rights and benefits.
Smooth dimming – Dim from 10% – 100% without flickers and humming. For best dimming result, please check your dimmer model below.
Compatible dimmer list:
LEVITON: 6683,DECORA-6672
LUTRON: SCL-153P,DVCL-153P,TGCL-153P
Compatible for 5-inch Can:
HALO:
LED Can: H550ICAT, H550RICAT
CFL Can: H524ICAT, H524RICAT, H570ICAT, H570RICAT, H571ICAT, H572ICAT, H572RICAT, H573ICATLD, H573RICATLD, H51CAT, H5RICA, H5T, H5RT
ALL-PRO:
Incandescent Can: EI500AT, EI500RAT, ET500, ET500R
JUNO:
TC20R, TC20S, TC20, IC20R, IC20N, IC20NW, IC20S, IC20W, IC20, IC25R, IC25W, PL526RE, ICPL526REN, ICPL518E
Compatible for 6-inch Can:
HALO:
LED Can: H7ICT,H7ICAT,H7ICATNB,H7RICAT,H7RICT, H7UICAT, H7UICT, H750RICAT, H750ICAT, H27ICAT, H27ICT, H27ICT, H27RICAT, H51CAT,
HRICAT, H750TCP
ALL-PRO:
Incandescent Can: H7ICT, H7ICAT, H7ICATNB, H7RICAT, H7RICT, H7UICAT, H7UICT, H750RICAT, H750ICAT, H27ICAT, H27ICT, H27RICAT, H27ICT,
H27RICAT, H51CAT, HRICAT, H750TCP
JUNO:
IC22, IC22R, IC22W, IC22S, IC23, IC23W, IC21, IC21R, IC25, IC25W, IC25S
Product Features
- 355° rotatable bulb head & 0-35°tilt angle, 36° beam angle, easy adjustable spotlighting. Perfect for sloped ceilings and accent lighting for a certain area
- CRI=92, excellent color consistency and rendering, 950lm high brightness, shows object’s true and natural color. Show it right, shine it bright
- 87% lower energy consumption, 10W LED equivalent to 75W traditional halogen. Save up to $251 on electric bill, estimate 32 years (3hrs/day) of operating
- Energy Star certified for energy efficiency, UL listed for top qualities and safe operations. 5 years warranty for costumer’s rights and benefits
- 10% – 100% smooth dimming without flickers and humming. E26/27 base, Compatible with most 5-in and 6-in housings. Please check your model below to achieve the best result
Loading...
Easy to install, great light, great value. I bought these to replace standard down lights in my wife’s art studio. She wanted control of the direction of the light. My existing cans (housing) are 6 inches wide. They went in quickly and easily, barely 5 minutes to change 6. There is a screw in adapter to accommodate standard bulb fixtures. The springs are strong and pull the fixture tight to the ceiling. The ring covers the housing properly so they look good. The head swivels almost all the way around, about 350 degrees and can be…
Junko, instantly went back: PICTURES DO NOT MATCH PRODUCT Zero stars. These are very cheap. This review is for the flat version, not eyeball. The light face where a recessed ring is, there are plastic tabs over the LED translucent plastic that look ridiculous. If you have these up really high, like 20 foot ceilings, sure they probably will work fine, but if you’re like most, these are noticeably cheap. I would not recommend these for residential; cheap commercial yup, no problem. The pictures on the website DO NOT SHOW THE CHEAP PLASTIC TABS ON THE…
Works, but required drilling holes in my fixture These don’t work like many retrofit kits, as the spring loaded clamps require a certain type of housing fixture. Other retrofit kits use simple friction metal clamps to work almost anywhere. To make these spring loaded clamps work in my fixture, I had to drill four holes in the housing, 2 pairs of holes on opposite sides of the inside of the fixture. These holes should be large enough for each hole to fit one end of the spring clamp end. It works, but took a lot more on my end to make these…